Gas Cylinder Selection
Our office chair cylinders are typically universal - the only difference between all standard cylinders is what height they make your seat, so whether you want to keep it simple or get technical, we're here to help!
Keep it simple (1 minute option):
If you bought your chair at a big box type store, and want a standard cylinder that's "close enough", try these:
- S6111 cylinder - it may be a little taller than your existing cylinder but of course, you can adjust that down using the lever.
- S6222 cylinder - this is a slightly shorter version than the one above. It's about 2" shorter than the S6111.
- If you’re 250# +, choose the HD version - the taller S6111-HD or shorter S6222-HD.
Getting warmer (3 minute option):
First confirm you have a standard cylinder here with one quick measurement.
Next, find the travel here with two easy steps.
Finally, select the closest cylinder to your travel:
|Travel||Standard Cylinder||Heavy Duty Cylinder||Chrome|
For the technical (7 minute option):
Click on the button below to access our easy-to-use gas lift sizing guide.
Then, if you have removed the clip, determine measurements 1, 2, and 3 and compare with the product listings here.
If you have not removed the clip, find your cylinder based on the travel in the table above and compare your other measurements within the product listing. Give us a call or email us if your measurements vary slightly, and we can tell you how it will affect the height of your seat!
For Steelcase parts, click here.
For Herman Miller parts, click here.
Want your replacement cylinder to be taller or shorter than the existing one? We can help! Call or email us.
Did you know that you can convert any chair with a standard cylinder into a stool? Here's how.